How Much Money Will You Save In Repairing Your Own Bike

How Much Money Will You Save In Repairing Your Own Bike?

One of the most economical and environment-friendly means of transportation is a bicycle. Anyone can learn how to ride the on two wheels and navigate their way to the office, school, and supermarket.

Bicycle hobbyists and professional cyclists even step up the game by traversing difficult forest trails, mountain terrains, and long and winding paved roads.

Our Top Pick For DIY Bike Repair

Learn to Repair & Upgrade Any Kind of Bike Now!

Learn More

However, no matter how durable the bicycles are according to their manufacturer, they are prone to wear off in time. The good thing is, you can always bring them to the local bike shop and pay for the bike repair cost.

But if you always find yourself going back to the shop because of maintenance problems, it is better to buy your own tools and fix the problem instead. Not only will you gain new knowledge and skills, but you’ll also save money from what could have been a hefty bike repair cost.

The bike shops usually charge the materials used and labor. How much money do you save? Find the answers below. Note that the following cost is just estimated according to the average price of tools and labor cost.

Checking and Cleaning Your Bike Regularly

The best way to know whether your bike needs repairing or replacement is to check it regularly. Checking it also means cleaning your bike every once in a while.

Or if you are not using it daily, you can schedule a time when you will test the brakes and the chains to determine whether they are still in a good condition. The important thing is to do a ride test near your home before you venture on a biking trip.

Aside from this, you should always do a scrub-down if you notice that something is wrong with your bike. You cannot tighten the bolts on a muddy or greasy wet frame. That would be frustrating. So remember to scrub and wipe clean the bike parts before getting your wrenches out.

In addition, you should have a basic toolkit. Your tools should include an Allen wrench, tire levers, chain tool, pump, and oil lubricant. If you are always on the go, look for the mini versions.

Fixing the flat tires: Up to $15

A flat tire is prone to puncture, which can lead to terrible accidents. If the ride is less smooth and it becomes hard to pedal, one of the obvious reasons would be the tires do not have enough air in it. Before you look for holes, check the tire pressure first.

If there are no holes seen, prepare your floor pump or mini pump. Find the intended PSI range or the air pressure range written or printed on your tire. Pump the tubes with pressure using your upper body.

After reaching the right tension, make sure to retighten the locking nut. Avoid using gas station pumps because they are too powerful and can blow out small bicycle tires.

Reattaching the bike chains: From $15-$40

Replacing the bike chains can get pricey if you let the professionals do it. Whereas if you buy a basic chain tool and replace the chains yourself, you’ll save a lot of money. However, expensive models can cost you a hundred dollars and more.

If you think your chains just needs cleaning and reattaching, that would be better. With the right cleaner and tools, you can get your chains clean, save so much money, and spend it for more important bike needs instead. Some expert bike owners don’t even need a tool for reattaching the chains.

Tightening the loose bolts: At least $10

A torque wrench is one of the most important tools in your bike tool kit. The cheapest model you can get is around $30. If you are going to compare the price to the bike repair cost of replacing nuts and bolts that cost you almost $20 per piece, buying a torque wrench is way cheaper.

You will use it for tightening the nuts and bolts that secure the handlebars, stem and seat post. Just remember not to tighten them too much or you are going to ruin the threads on the bike. You do not have to retighten them every time after a ride. To be careful, check the manuals about bolt tightening if necessary.

Loosening the seat: $15

There is nothing more uncomfortable than riding while seating on a seat that is too high or too low. To loosen them, you only need a wrench, pliers, and a WD-40 or lubricant, which are the tools that you might already have at home.

First, loosen the binder and remove the collar and bolt. Then soak the area with lubricant overnight. It should loosen up the seat so you can adjust it to a better height. To avoid this job, you can maintain the post tube well-greased at all times.

Our Top Pick For DIY Bike Repair

Learn to Repair & Upgrade Any Kind of Bike Now!

Learn More

Click Here to Leave a Comment Below

Leave a Reply: